Tag: hydraulic fracturng

Fracking Is Good!

Sometimes you just have to take the bull by the horns and look something up, or study a technology to learn the truth. I had to do this with global warming, and I am having to do it with natural gas fracking, technically known as hydraulic fracturing.

I have known that this process existed in the drilling of oil wells since we lived in Houston in the 1970’s. A simple Google search will tell you that fracking in oil wells has been done since the 1940’s. There are over 840,000 oil and gas wells in the United States, and about 1.2 million wells world wide. In most of these wells some form of hydraulic fracturing was used.

Here’s my reference:

Hydraulic Fracturing 101: What Every Representative, Environmentalist, Regulator, Reporter, Investor, University Researcher, Neighbor and Engineer Should Know About Estimating Frac Risk and Improving Frac Performance in Unconventional Gas and Oil Wells

This is a paper written for the Society of Petroleum Engineers International, the professional society of engineers engaged in the petroleum industry. As such, their members have generated reams of technical studies about hydraulic fracturing. There have been over 550 papers on shale fracturing, and there are over 3,000 papers on all aspects of horizontal wells. This is one of the most studied and researched technical areas in science.

Whenever an oil or gas well is drilled, a risk matrix is constructed for that well and field by the company. Those guys have been at it for so long, and have done this so many times that these estimates of risk are pretty much everyday things. They know how to do this.

Here are some of the salient points of the paper.

1. Polluted ground water is not caused by hydraulic fracturing. Fracking in and of itself cannot pollute ground water because the fracking takes place over a mile under the surface. It is usually a well construction problem, and that is a problem easily mitigated. Most often, ground water pollution is caused by water well drilling, and the water seeping up through the well has come through a coal seam, and is already polluted. This is a well known problem, especially in New York and Pennsylvania. If you remember the first oil well was drilled in Pennsylvania in 1859. They didn’t drill to discover oil because it was laying all over the ground. There are thousands of places where oil seeps to the surface and contaminates ground water, naturally.

2. Risk of earthquakes is extremely over-stated. Earthquakes can be caused by hydraulic fracturing, but very few will be felt at the surface. We are not talking about San Francisco scale earthquakes, here. The quakes caused by hydraulic fracturing are usually micro-quakes, and very few reach the intensity high enough to be felt on the surface.

3. General surface pollution can be caused by other processes. There are many sources of pollution around drilling sites. Thousands of gallons of drilling mud are used there, along with the water used in the fracking process. Pollution can result from accidental spills, or from the transport of those fluids to the drilling site. Care has to be taken in these areas.

In the introduction the author makes the following statement:

“The spectacular increase in North American natural gas reserves created by shale gas development makes shale gas a disruptive technology, threatening profitability and continued development of other energy sources.”

Yep! Natural gas from shale takes money out of the pockets of coal companies, solar companies, and wind turbine companies. Natural gas from shale fracking is so cheap that everybody is against it except the consumer.

Now, you know why there is so much press against fracking in natural gas wells. There is no evidence that it will pollute the environment, or that is can poison an entire region’s water supply. There is no reason to panic, unless you are invested in solar and wind power.

Follow the money!